The feeder tray of the ESKIMO is cooled completely. Via a temperature sensor inside the machine always the optimal cooling degree is generated.

 

Complete with removable worm housing, steel worm with portioner, pre-chamber and UNGER H82 3-pcs. cutting set incl. sickle ring knife and stainless steel disks and spacer ring 18 mm wide.

 

The machine is completely made of stainless steel.

 

Tray, casing, filling shaft, worm housing, worm shaft and locking ring are made of stainless steel.

 

    The special design is perfectly suitable for modern grocery stores

    The high output per hour of approx. 400 kg is unsurpassed with cooled mincers

    Due to the conical feeder shaft, the stuffer is - in practice- not necessary

    In production of minced meat the standards of hygiene are kept.

 

Output per hour: approx. 400 kg

Tray volume: 6 litres

Machine height (WxDxH): 475 x 750 x 445 mm

Weight: approx. 80 kg

The feeder tray of the ESKIMO is cooled completely. Via a temperature sensor inside the machine always generates the optimal cooling degree.

 

Complete with removable worm housing, stainless steel worm and UNGER H82 3-pcs. cutting set incl. sickle ring knife, stainless steel disks and stainless steel spacer ring 18 mm wide.

 

The machine is completely made of stainless steel.

 

Tray, casing, filling shaft, worm housing, worm shaft and locking ring are made of stainless steel.

 

    The special design is perfectly suitable for modern grocery stores

    The high output per hour of approx. 400 kg is unsurpassed with cooled mincers

    Due to the conical feeder shaft, the stuffer is - in practice- not necessary

    In production of minced meat the standards of hygiene are kept.

 

Output per hour: approx. 400 kg

Tray volume: 6 litres

Machine height (WxDxH): 475 x 470 x 445 mm

Weight: approx. 80 kg

Complete with removable worm housing, stainless steel worm and Unger 3 pcs. cutting set R70 and spacer ring.

 

The machine is completely made of stainless steel.

 

    The special design is perfectly suitable for modern grocery stores

    The high output per hour of approx. 150 kg is unsurpassed with shop  mincers

    Due to the conical feeder shaft, the stuffer is - in practice- not necessary

    In production of minced meat the standards of hygiene are kept.

 

Output per hour: approx. 150 kg

Tray volume: 4,2 litres

Machine height (WxDxH): 295 x 345 x 50 mm

Weight: approx. 40 kg                                              

Complete with removable worm housing, steel worm and 3 pcs. cutting set Unger H82, consisting of sickle ring knife, stainless steel plates and stainless steel spacer ring 36 mm wide.

 

The MEW 713 can also be supplied with Unger cutting set H82, 5 pcs., and stainless steel spacer ring 18 mm and 36 mm wide.

 

The machine is completely made of stainless steel.

 

    The special design is perfectly suitable for modern grocery stores

    The high output per hour of approx. 400 kg is unsurpassed with shop mincers

    Due to the conical feeder shaft, the stuffer is - in practice- not necessary

    In production of minced meat the standards of hygiene are kept.

 

Output per hour: approx. 400 kg

Tray volume: 6 litres

Machine height (WxDxH): 370 x 390 x 440 mm

Weight: approx. 45 kg

The P130 are manual food mincers for medium volume productions. They are suitable for mincing any type of fresh or semi-frozen (up to -5º C) product.

 Push button operation makes them simple and easy to use. Their design with smooth surfaces and removable worms

guarantee complete and easy cleaning.

 Safety: Motor thermical protections, low voltage control, emergency stop and silent work.

 They use the Unger cutting system, which consists of between three or five pieces.

 Standard accessories: 1 single knife, 3 plates, 2 separating rings, 1 extractor, 1 feeder.

 Optional accessories: Hard part separator. High legs for unloading over 200 litre trucks.

Newsletter

Enter your email below and never miss another news from Headline. No spam! Unsubscribe anytime!