AUTOTHERM STEAM-SMOKE GENERATOR AD 54 / AD 56 / AD 66

The steam-smoking process developed by AUTOTHERM to perfection offers advantages, especially for hot-smoked products (e.g. Frankfurters), which are not achieved by any other smoking system.

The smoke is not generated by smouldering wood chips, but by superheated steam, which is pressed through the chips and in doing so absorbs all colouring and taste-giving constituents. This steam-smoke is fed into the chamber, where it condenses on the product. The smoking times are therefore extremely short.

Steam smoke is very colour stable and cannot be washed off, either by water or by steam. It is also soot-free and is significantly less contaminated with carcinogenic benzo(a)pyrene and other PAHs (Polymers Aromatic Hydrocarbons) than conventional smoke.

The high humidity during smoking means that the products do not dry out and therefore reduces weight losses.

The high humidity and temperature further increases the temperature in the core of the products during smoking. This shortens the following cooking process.

Due to the extremely short smoking times it is possible for one steam-smoke generator to supply up to three chambers (max of 4 trolleys/chamber).

The AUTOTHERM AW series saw dust smoke generators are especially good for all cold-smoked products.

Moistened sawdust is ignited on a burning plate by a heating element. After the sawdust has been ignited a slight and controlled air draught enables it to continue to glow, just like in days gone by. A stirrer system provides a continuous supply of sawdust. The quantity of smoke produced can be adjusted by optionally adjusting the stirring intervals. The fine glow smoke is mild and natural; ideal for salami and ham

http://autotherm.de/wp-content/uploads/2015/03/Rauch2.jpg

AUTOTHERM WOOD CHIP SMOKE GENERATOR AWS 1 / AWS 2 / AWS 3 / AWS 4

Wood chip smoke generators can be used for both hot smoking and for cold smoking. They are therefore particularly suitable for connecting to universal chambers. Coarse wood chips are ignited in a wood chip bed by a heating element. A continuously controlled air supply maintains the glowing process. An agitator removes the ashes and adds new chips. The smoke intensity can be increased by adjusting the stirring interval. This generates a more intensive smoke, which lends the product an aromatic taste and a good colour.

http://autotherm.de/wp-content/uploads/2015/03/Rauch1.jpg

 

Smoke generator

Height (A)

Height (B)

Height (C)

Electric Kw

Steam 0.5 Bar

Connection socket

AD54

1660

1280

600

7,55

20kg/h

150mm

AD56/66

1660

1280

600

8,55

25kg/h

150/200mm

AW1

1555

720

370

0,78

-

150mm

AW1

1800

720

470

0,97

-

150mm

AW3

1800

870

620

1,22

-

150mm

AW4

1900

950

690

1,42

-

150mm

AWS1

1280

330

585

1,09

-

150mm

AWS2

1490

450

620

1,06

-

150mm

AWS3

1855

600

800

1,09

-

150mm

AWS4

1855

750

900

1,67

-

200mm

http://autotherm.de/wp-content/uploads/2015/03/Rauch_Parallax2.jpg

Newsletter

Enter your email below and never miss another news from Headline. No spam! Unsubscribe anytime!