Peak scientific
Peak scientific
The Precision Hydrogen Trace 500 generator is designed primarily for GC carrier gas use, and can also be used for detectors requiring hydrogen fuel gas such as FID and FPD. One generator is capable of supplying multiple GC instruments.
This generator offers a safe, reliable and convenient solution for those using hydrogen for GC carrier gas, producing the highest purity of hydrogen from the Precision series by utilizing a Proton Exchange Membrane to create the hydrogen gas from deionized water, as well as Pressure Swing Absorption and molecular sieve technology to remove moisture content down to trace levels. The Precision Hydrogen Trace generators are also suitable for providing collision gas for ICP-MS.
The Precision Hydrogen Trace 500 generator also comes with many highly robust safety features as standard, allowing for peace of mind in the laboratory and a far safer, dependable and more convenient alternative to cylinder gas.
Features
- Suitable for flame gas and carrier gas at trace detection limits
- 9999% purity
- Internal leak detection with automatic shutdown features
- Proven PEM technology to generate hydrogen safely and reliably
- Regenerative PSA dryers to ensure highest level of purity
- Automatic loading pump as standard
- Maintenance limited to replacing de-ionizer cartridge
- Compact, space-saving modular design
- Creates hydrogen on demand, minimal storage of hydrogen in the system
- Short and easy start-up and shutdown procedures
- Combine multiple units for higher flow requirements
- GC in-oven hydrogen leak detector available as an optional extra
- 12 month comprehensive on-site warranty
- Peak also offers a 3 year cell warranty with this generator as standard
Generator Outlets
Gas Type: Hydrogen
Gas Flow500cc/min
Purity99.9999%
Other
Dew Point-94°/ -70 °C
Input requirements
Outlet Pressure Range0 - 100psi
Power Consumption660 Watts - 1380 Watts
Electrical requirements
Voltage110- 230vAC
Frequency50/60Hz
Currentmax 6 amps
General
Size (HxWxD) mm406 x 380 x 540mm
Size (HxWxD) Inches15.9 x 14.9 x 21.2 inches
Generator Weight29 kg / 64 lbs
https://www.youtube.com/watch?v=n-YarkE2nro
Designed exclusively for Sciex applications, the Genius ABN2ZA is a three gas output system providing nitrogen and dry air to supply curtain, source and exhaust gas. This generator is compatible with a wide range of Sciex LC-MS instruments up to and including the 4600 Triple TOF.
The ABN2ZA is built around the trusted and proven technology of Peak Scientific’s Genius series of generators. Designed mainly for LC-MS applications, these are self-contained systems featuring integrated compressors, delivering laboratory-grade nitrogen at various pressures and flow rates required by numerous instruments.
- Delivers nitrogen as curtain gas and dry air as source and exhaust gas
- Developed specifically for Sciex LC-MS instruments
- Compressor based solution, no need for an external air supply
- Service indication to allow planning of preventative maintenance
- Minimal set-up required
- Highly economical source of nitrogen gas with low lifetime running costs
- Gas is supplied on demand so works to your schedule
- High-specification latest generation compressors located in insulated chamber reducing noise and vibration
- 12 month comprehensive on-site warranty
Generator Outlets
Gas Type: Nitrogen
Gas Flow12L/min
Outlet Pressure80psi
Gas Type 2: Dry Air
Gas Flow24L/min
Outlet Pressure110psi
Gas Type 3: Dry Air
Gas Flow8L/min
Outlet Pressure60psi
Electrical requirements
Voltage230 ± 10%vAC
Frequency50/60Hz
Current7 amps
General
Size (HxWxD) mm713 x 600 x 750mm
Size (HxWxD) Inches28.1 x 23.6 x 29.5 inches
Generator Weight108.5 kg / 239 lb
The culmination of over a decade's work perfecting on-site gas generation for LC-MS, the Genius NM32LA is the pinnacle of our Genius series. With many thousands of units in the field, the NM32LA has become the proven and reliable nitrogen generator of choice in countless laboratories across the world.
The NM32LA delivers up to 32 liters per minute of nitrogen gas, suitable for most LC-MS (Liquid Chromatography - Mass Spectrometery) instruments available on the market today.
Part Number: 10-6020 (230v) | 10-6520 (110v)
- Compressor based solution, no need for an external air supply
- Service indication to allow planning of preventative maintenance
- High-specification latest generation compressors located in insulated chamber reducing noise and vibration
- Minimal set-up required
- Highly economical source of nitrogen gas with low lifetime running costs
- Gas is supplied on demand so generator works to your schedule
- Proven robust and reliable nitrogen gas generation technology
- Safe and practical laboratory-grade nitrogen
- 12 month comprehensive on-site warranty
Generator Outlets
Gas Type: Nitrogen
Gas Flow32L/min
Outlet Pressure100psi
Electrical requirements
Voltage110/230 ± 10%vAC
Frequency50/60Hz
Current7 amps
General
Size (HxWxD) mm713 x 600 x 750mm
Size (HxWxD) Inches28.1 x 23.6 x 29.5 inches
StartUp Time30 Mins
Generator Weight102.5kg / 226 lbs
Producing between 11 and 118 L/min of high purity nitrogen gas, the Infinity XE 5011 can comfortably supply multiple laboratory instruments. With a variable flow rate in relation to purity, set the flow rate you need to meet the total demands of the instruments in your lab.
Peak Scientific’s Infinity XE Series generators have been engineered to provide nitrogen to laboratories which already have an external source of clean, dry air which at a minimum meets ISO8753-1:2010 Class 1.4.1 (we can provide assistance on external compressors or pre-filtration systems as part of an Infinity gas generation solution). These systems contain no moving parts, are effectively silent whilst in operation and require minimal maintenance.
- Flow rates from 11-118 L/min
- Variable flow rate
- 135 psi outlet pressure
- Purity from 95-99.5% (flow rate dependent)
- Tried and tested membrane technology for high purity gas
- Small laboratory footprint – using minimal lab space
- O2 analyzer fitted as standard – only a single annual calibration required
- Optional purity shutdown feature
- True Eco mode - nitrogen supplied only when demanded by the instrument
Generator Outlets
Gas Type: Nitrogen
Gas Flow11-118L/min
Inlet Pressure60-145psi
Outlet Pressureup to 135psi
Purity95-99.5%
Other
Dew Point+3 °C
Electrical requirements
Voltage100-230vAC
Frequency50/60Hz
General
Size (HxWxD) mm500 x 500 x 995mm
Size (HxWxD) Inches19.685 x 19.685 x 39.173 inches